Annual Chain Saw Maintenance Special

Clean saw and give visual inspection
Inspect condition and operation of throttle trigger, trigger interlock, and master control switch.
Check operation and condition of the chain brake
Drain and clean chain oil tank
Sharpen or replace saw chain (as required) adjust chain tension
Inspect condition of drive sprocket
Remove and inspect guide bar, clean groove, deburr bar, lubricate nose sprocket (if required)
Clean or replace Air Filter
Replace spark plug
Inspect condition of engine mount, anti-vibe buffers and/or springs (as equiped)
Clean cooling inlets and engine cooling fins
Tighten and replace any missing screws, nuts and fasteners
Clean or replace spark arrester and check condition of muffler
Check engine idle speed, carburator settings, and readjust as needed
Test operation of chain oiler