Annual Chain Saw Maintenance Special

·        Clean saw and give visual inspection

·        Check operation and condition of chain brake

·        Drain fuel from tank, clean tank, replace fuel filter, and inspect condition of fuel hoses

·        Drain and clean chain oil tank

·        Sharpen or replace saw (chain as required) adjust chain tension

·        Inspect condition of drive sprocket

·        Remove and inspect guide bar, clean grove deburr bar, lubricate nose sprocket (if required)

·        Clean or replace Air filter

·        Replace spark plug

·        Inspect condition of engine mount anti-vibe mounting buffers and springs

·        Clean cooling inlets and engine cooling fins

·        Tighten and replace ant missing screws and nuts

·        Clean or replace spark arrester and condition of muffler

·        Check condition of chain catcher and repair as needed

·        Check idle speed of engine and carburetor settings and readjust if necessary

·        Test operation of chain oilier

All this and more for only $39.95 plus parts